The observation of a large gauche preference when 2-fluoroethylamine and 2-fluoroethanol become protonated

The energies of the gauche and anti conformers of 2-fluoroethylamine, 2-fluoroethanol and their protonated analogues are calculated using density functional theory. Unlike the non protonated systems, the protonated systems show a strong gauche effect where the C-F and the C-(+)NH(3) or C-F and C-(+)OH(2) bonds are gauche rather than anti to each other. Single crystal X-ray diffraction studies of 2-fluoroethylammonium compounds identify the same conformational preference.     

Coherent effects in energy transport in model dendritic structures investigated by ultrafast fluorescence anisotropy spectroscopy

Measurements of ultrafast fluorescence anisotropy decay in model branched dendritic molecules of different symmetry are reported. These molecules contain the fundamental branching center units of larger dendrimer macromolecules with either three (C(3))- or four (T(d), tetrahedral)-fold symmetry. The anisotropy for a tetrahedral system is found to decay on a subpicosecond time scale (880 fs). This decay can be qualitatively explained by F?rster-type incoherent energy migration between chromophores. Alternatively, for a nitrogen-centered trimer system, the fluorescence anisotropy decay time (35 fs) is found to be much shorter than that of the tetramers, and the decay cannot be attributed to an incoherent hopping mechanism. In this case, a coherent interchromophore energy transport mechanism should be considered. The mechanism of the ultrafast energy migration process in the branched systems is interpreted by use of a phenomenological quantum mechanical model, which examines the two extreme cases of incoherent and coherent interactions.     

Ab initio MO-SCF calculation on a model of anomalous water

Ab initio calculations are carried out on the planar hexamer model of anomalous water using a variety of basis sets. The results are compared to results of similar calculations on free water and water in the ice I-like puckered ring configurations.

---

Zusammenfassung Es werden ab initio-Rechnungen für das planare Hexamer-Modell von anomalem Wasser unter Verwendung mehrerer BasissÄtze durchgeführt. Die Ergebnisse werden mit Resultaten Ähnlicher Rechnungen über freies Wasser und Wasser in der I-Eis Ähnlichen Konfiguration verzerrter Ringe verglichen.

---

Résumé Calculs ab initio sur le modèle hexamérique plan de l'eau anormale en utilisant différentes bases. Les résultats sont comparés à ceux de calculs similaires sur l'eau libre et sur l'eau dans une configuration cyclique compacte analogue à celle de la glace I.

     

Photo-stabilising action of metal chelates in polypropylene—Part IV: Influence of metal stearates in an exchange mechanism

The effect of calcium and nickel stearates on the photo-stabilising action and photo-decomposition of one calcium and two nickel metal chelates in polypropylene has been examined using infra-red and ultraviolet derivative spectroscopy. Whereas the presence of calcium stearate antagonises the photo-stabilising action of one nickel chelate, Irgastab 2002, it strongly synergises with the other, Cyasorb UV 1084. The presence of nickel stearate synergises with the calcium chelate, Irganox 1425, in unprocessed polymer whereas, in processed polymer, it exhibits antagonism. Rates of photo-decomposition of the metal chelates are also affected by metal stearates. The data suggests that, with these nickel chelates, there might be some degree of metal exchange with certain metal stearates.     

Photo-stabilising action of metal chelates in polypropylene—Part I: Excited state quenching versus UV antioxidant action under polychromatic irradiation

The photo-stabilising action of three metal chelates—nickel (II) 2,2′ thiobis (4-tert-octylphenylato) n-butylamine and the nickel and calcium derivatives of bis (ethyl-3,5-di-tert-butyl-4-hydroxybenzyl) phosphonate, in polypropylene—is examined using normal and second order derivative ultraviolet, infra-red and phosphorescence spectroscopic techniques and hydroperoxide analysis. Whilst all three stabilisers quenched the phosphorescence emission of a powerful photo-sensitiser, benzophenone, there was no protective action during photo-sensitised oxidation of the polymer. In the case of anthraquinone, there was no quenching and no protection. Processing history plays a dominant rôle in controlling the photo-stabilising performance of the chelates. Each stabiliser operates differently, being dependent on its relative stability during processing and photo-oxidation and on the formation and destruction of polymeric and antioxidant hydroperoxides during processing. Metal chelates operate by inhibiting polymer hydroperoxide formation during processing and acting as ultraviolet stable chain terminators or by giving products during the early stages of photo-oxidation which are themselves effective stabilisers.     

Multisample probe for fast-atom bombardment / mass spectrometry

An inexpensive multisample fast-atom bombardment (FAB) probe assembly was designed for high-throughput analysis of samples on a VG ZAB-SE mass spectrometer. The system consists of a vacuum lock system and a FAB probe whose tip contains five or more sample wells. The probe enters the mass spectrometer source region perpendicular to the secondary ion beam axis, The probe is maintained at high voltage on contact with a spring clip attached to the screen plate of the source block. Sample throughput with the multisample probe is twice that of a coaxial probe, with about twice the sensitivity and no sample cross contamination.     

Photo-stabilising action of metal chelate stabilisers in polypropylene: Part VII—Additive interactions

The interactions of three metal chelates (nickel (II) 2,2′-thiobis (4-tertoctyl-phenolato), n-butylamine (Cyasorb UV 1084) and the nickel and calcium derivatives of bis(ethyl-3,5-di-tert-butyl-4-hydroxybenzyl) phosphonate (Irgastab 2002 and Irganox 1425)) with other commercial additives, in the stabilisation of polypropylene film, are examined using normal and second-order derivative ultraviolet and infra-red spectroscopic techniques. It is shown that the observed behaviour is dependent on the particular additive, the processing history of the polymer and the metal chelate concerned, and is therefore highly complex. All three chelates show antagonism with a hindered piperidine, bis(2,2,6,6-tetramethyl-4-piperidinyl) sebacate (Tinuvin 770), in unprocessed polymer, whereas one of the chelates behaves synergistically with this additive in processed samples. The chelates also show antagonism with a primary antioxidant, tris((3-(3′,5′-di-tert-butyl-4-hydroxybenzyl)-2′'-aceto-ethyl)) isocyanurate (Goodrite 3125), whereas, with a secondary antioxidant, distearyl pent-aerithrityl diphosphite (Weston 618), their behaviour is synergistic in both unprocessed and processed polymer. Two of the chelates show synergism with 2-hydroxy-4-n-octoxybenzophenone (Cyasorb UV 531), the remaining chelate showing antagonism. Mixtures containing a three-additive system show a more complex behaviour. The results are explained in terms of hydroperoxide decomposition, inhibition, stabiliser dispersion, ultraviolet stability and additive compatibility.     

Improved quantitation of 2,4-dichlorophenol in plant tissues by high-performance liquid chromatography with amperometric detection

For the determination of 2,4-dichlorophenol (DCP) residues in plant tissues, the use of high-performance liquid chromatography with amperometric detection decreases the quantitation limits by a factor of five compared to those obtained with gas chromatography with Hall conductivity detection. It also avoids the clean-up and derivatization procedures required for electron-capture detection. After extraction of DCP from plant tissue by steam distillation and collection in toluene, an alumina clean-up column is used to remove electroactive interferences from the samples. The DCP is then extracted into aqueous alkaline solution, neutralized, and diluted with acetonitrile to ca. 50% (v/v). An alternative clean-up made use of an in-line, pre-column electrochemical procedure, in which case the alumina column was not used. The components were separated with a reverse-phase column and detected with a polychlorotrifluoroethylene/graphite composite electrode at an applied potential of +1.0 V vs. Ag/AgCl. The quantitation limit for DCP in the plant tissues was 100 pg per injection (0.05 mg Kg^?1).     

Electroreduction of Aryldiazonium Ion at the Polar and Non-Polar Faces of ZnO: Characterisation of the Grafted Films and Their Influence on Near-Surface Band Bending

ZnO is a strong candidate for transparent electronic devices due to its wide band gap and earth-abundance, yet its practical use is limited by its surface metallicity arising from a surface electron accumulation layer (SEAL). The SEAL forms by hydroxylation of the surface under normal atmospheric conditions, and is present at all crystal faces of ZnO, although with differing hydroxyl structures. Multilayer aryl films grafted from aryldiazonium salts have previously been shown to decrease the downward bending at O-polar ZnO thin films, with Zn−O−C bonds anchoring the aryl films to the substrate. Herein we show that the Zn-polar (0001), O-polar (000 ), and non-polar m-plane (10 0) faces of ZnO single crystals, can also be successfully electrografted with nitrophenyl (NP) films. In all cases, X-ray photoelectron spectroscopy (XPS) measurements reveal that the downward surface band bending decreases after modification. XPS provides strong evidence for Zn−O−C bonding at each face. Electrochemical reduction of NP films on O-polar ZnO single crystals converts the film to a mainly aminophenyl layer, although with negligible further change in band bending. This contrasts with the large upward shifts in band bending caused by X-ray induced reduction.     

A millimeter/sub-millimeter-wave spectroscopic study of the FeCl radical (XΔi)

Pure rotational spectroscopy of the FeCl radical (X⁶Δ_i) has been carried out using millimeter/sub-millimeter direct absorption techniques. The species was created by the reaction of chlorine with iron vapor. All six spin-orbit components were observed in the majority of the twenty-one rotational transition recorded. Chlorine hyperfine structure was resolved in the Ω = 9/2 and 7/2 components, and lambda-type doubling observed in the Ω = 3/21/2, and −1/2 ladders. The data were analyzed with a ⁶Δ Hamiltonian, and rotational, fine structure, lambda-doubling, and hyperfine parameters determined. The hyperfine and lambda-doubling interactions in FeCl appear to be different from those in the FeF radical.